Everything about Piston totally explained
» For other uses see Piston (disambiguation).
A
piston is a component of
reciprocating engines,
pumps and
gas compressors. It is located in a
cylinder and is made gas-tight by
piston rings. In an engine, its purpose is to transfer force from expanding gas in the cylinder to the
crankshaft via a
piston rod and/or
connecting rod. In a pump, the function is reversed and force is transferred from the crankshaft to the piston for the purpose of compressing or ejecting the
fluid in the cylinder. In some engines, the piston also acts as a
valve by covering and uncovering
ports in the cylinder wall.
Piston engines
» Main article: Reciprocating engine
Internal combustion engines
There are two ways that an
internal combustion piston engine can transform combustion into motive power. These are the
two-stroke cycle and the
four-stroke cycle. A single cylinder two-stroke engine produces power every crankshaft revolution, while a single cylinder four-stroke engine produces power once every two revolutions. Older designs of small two-stroke engines produced more pollution than four stroke engines. However, modern two-stroke designs, like the
Vespa ET2 Injection utilise
fuel-injection and are as clean as four-strokes. Large diesel two-stroke engines, as used in ships and locomotives, have always used fuel injection and produce low emissions. One of the biggest internal combustion engines in the world, the
Wärtsilä-Sulzer RTA96-C is a two-stroke; it's bigger than most two-story houses, has pistons nearly 1
metre in
diameter and is one of the most efficient mobile engines in existence. In theory, a four-stroke engine has to be larger than a two-stroke engine to produce an equivalent amount of power. Two-stroke engines are becoming less common in developed countries these days, mainly due to manufacturer reluctance to invest in reducing two-stroke emissions. Traditionally, two-stroke engines were reputed to need more maintenance (despite exceptions like the
Ricardo Dolphin engine, and the
Twingle engines of the
Trojan car and the
Puch 250 motorcycle). Even though the simplest two-stroke engines have fewer moving parts, they could wear out faster than four-stroke engines. However fuel-injected two-strokes achieve better engine lubrication, and cooling and reliability should improve considerably.
Gallery
image:piston.jpg|A piston and its connecting rod.
Image:Cad crank.jpg|CAD drawing of crankshaft and pistons.
Image:Piston Power Plant Stony Batter.jpg|Large pistons (over 0.5 m incl. connecting rod).
Image:Piston.gif|Simplified piston animation.
Steam engines
Steam engines are usually double-acting (for example steam pressure acts alternately on each side of the piston) and the admission and release of steam is controlled by
slide valves,
piston valves or
poppet valves.
Air cannons
There are two special type of pistons used in
air cannons: close tolerance piston and double piston. While in close tolerance piston, O-rings are used as valve but in double piston, O-rings are not used.
There are some features of close tolerance piston mentioned below:
- Piston can swell and stick.
- Fits tightly in the cylinder.
- Tight Tolerance fit.
- Properties alter due to atmospheric change.
- Backlash may such,some of the bin material into the valve which also can cause the piston to stick.
Common features of double piston:
Cannot swell and stick.
Fits loosely in the cylinder.
No tight tolerance fit.
Properties are not altered due to atmospheric change.
Even if foreign material enters the valve,the double piston doesn't stick.Further Information
Get more info on 'Piston'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://piston.totallyexplained.com">Piston Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |